GE eBike II Series, Service Manual

Page: 114 / 234

- 114 - eBike II, eBike II L, eBike II EL 2018112-069 Rev. F
• Saddle adjustment motor
- Check all possible positions by moving the saddle to the top and to
the bottom position.
- Return saddle to the middle position.
Expected result: saddle position changes to the expected positions Pass/Fail
• Speed and Noise
- Check speed indication on LCD and additional speed indication for test subject.
- Check noise level of idling drive unit (e.g., for grinding noises or noise from the bearing).
Expected result: peed displayed on both displays and no noticeable noise Pass/Fail
• Units with NIBP module:
- Check cuff tubing and tubing connections, microfon connectors
- Check blood pressure measurement on test subject at rest
- Check blood pressure readings on LCD
Expected result: BP values are displayed and in proper range Pass/Fail
• Start manual exercise test, change load (e.g. start 50 W, increase 25 W)
- Check load level and load indication
Expected result: Load changes as expected Pass/Fail
• If ergometer is remote controlled from ECG recorder or PC-ECG system:
- Check connecting cable
- Check load control via ECG recorder or PC ECG system
- Check remote start if applicable
Expected result: Ergometer can be controlled by external unit Pass/Fail