GE eBike II Series, Service Manual

Page: 57 / 234

2018112-069 Rev. F eBike II, eBike II L, eBike II EL - 57 -
OUTPUT 4 Diastole
GAIN 1000 mV
GAIN 100 mmHg
ENTER
a
lIgnMent
„o
uput
: a
nalog
d
Iastole
“
The output voltage representing the diastolic value is
defined with this setting.
It is possible to adjust the voltage and / or the diastolic
value.
The setting is performed as described above under
Alignment „Ouput: Analog Load value“
Setting range:
GAIN
(voltage): 500 to 2000 mV in
2 mV steps
GAIN
(diastole): 50 to 250 mmHg in
5 mmHg steps
a
lIgnMent
„o
uput
: rpM“
The output voltage representing the actual rpm value is
defined with this setting.
It is possible to adjust the voltage and / or the rpm value.
The setting is performed as described above under
Alignment „Ouput: Analog Load value“
Setting range:
GAIN
(voltage): 200 to 1000 mV in
2 mV steps
GAIN
(rpm): 30 to 130 rpm in
5 rpm steps
a
lIgnMent
„o
utput
: eCg“
(For eBike II REHA Ergometer with integrated ECG amplifier
only)
The zeroline and the amplitude of the analog ECG output
signal is defined.
The setting is performed as described above under
Alignment „Ouput: Analog Load value“
Setting range:
ZEROLINE
: 200 to 10000 mV
in 10 mV steps
AMPLITUDE
200 to 10000 mV
in 10 mV steps
OUTPUT 5 rpm
GAIN 1000 mV
GAIN 50 rpm
ENTER
OUTPUT 6 EKG
ZEROLINE 5000 mV
AMPLITUDE 5000 mV
ENTER