GE eBike II Series, Service Manual

Page: 49 / 234

2018112-069 Rev. F eBike II, eBike II L, eBike II EL - 49 -
The service menu with the following parameters appears:
•
Baudrate 8N2
•
Static Load Calibration
•
Analog Comparison (with option COM only)
•
ECG-Startpulse
•
NIBP Parameter (with option NIBP only)
•
Software Update
•
Dynamic Load Calibration
•
PC-Mode
•
Saddle Calibration (eBike II comfort only)
•
NIBP Calibration (with option NIBP only)
•
NIBP Test (with option NIBP only)
•
Ergometer Type (without option NIBP only)
•
System Config.
•
Error log
Select the desired parameter by use of the right and left
softkeys (
↑ ↓
) and confirm with SET.
d
efault settIngs
s
ettIngs Menu
• default mode menu
• protocols see operator manual
• contrast at optimum
• load change +/- 5W
• language US devices english
other devices german
• beep ON
• date/time current values
• ECG type digital
• rpm min: 54 / max: 65
• pulse display OFF
s
ervICe Menu
•
Baudrate 8N2 4800
•
ECG-Startpulse leadtime: 60 sec
pulswidth: 100 msec
•
NIBP Parameter leadtime: 60 sec
Resting NIBP: ON
•
PC-Mode-Automatic: ON
•
Ergometer Type ER900
•
Analog comparison 20W = 0,2 V / 300W = 3.0 V
•
System Config.
Saddle engine eBike basic/L/EL 0
eBike comfort 1
NIBP module devices w/o NIBP 0
devices with NIBP I
Analog interface 0
60 Hz Power US devices 1
other devices 0
Hint
• The service menu in the ergometers is available in english
only.
• Depending on the actual ergometer configuration, not all
settings are visible.
• Leaving the service menu is only possible by switching the
device off.
• The sequence of the following descriptions does not
follow the sequence in the service menu.
S
election of paraMeterS in Service Menu
Service Menu
Baudrate 8N2
Static Load Calib.
Analog Comparison
ECG-Startpulse
NIBP Parameter
SET