GE CTF878 Programming Manual Download Page 77

Page: 77 / 116

Programming Meter Settings

4-3

February 2009

Entering Date and Time

In Operate mode, the Status Bar displays the current date and time
above the measurements in the upper right corner of the screen. The
Date/Time option allows you to set the date or time, which are
required for correct data logging operation.

To set the time:

From the Meter menu, scroll to the Date/Time entry and press

[ENTER]

. The Meter Settings window reopens (see Figure 4-2 on

page 4-2).

From the Units option, press the [

] key once to reach the date

text box. This box displays the current meter date.

Press

[ENTER]

to enter the text window. The meter highlights the

center number. Use the [

] and [

] keys to scroll to any number

you wish to change.

Two alternatives are available to change a highlighted number:

•

Use the numeric keys to enter the desired number.

•

Use the [

] or [

] arrow keys to scroll, in 1-digit increments,

to the desired number. (For example, if the text box highlights
09, pressing the [

] key twice changes the number to 07. You

can scroll from 01 to 12 for the month and from 01 to 31 for the
day (depending on the number you have selected for the
month.)

In either case, press

[ENTER]

to confirm the entry.

To enter or change the time:

From the time text box, press the [

] key once to scroll to the

time text box. This box displays the current meter time.

Press

[ENTER]

to enter the text box. The meter highlights the first

number. Use the [

] and [

] keys to scroll to any number you

wish to change.

Two alternatives are available to change a highlighted number:

•

Use the numeric keys to enter the desired number.

•

Use the [

] or [

] arrow keys to scroll, in 1-digit increments,

to the desired number. (For example, if the text box highlights
09, pressing the [

] key twice changes the number to 07.) You

can scroll from 01 to 12 for the hour and from 01 to 59 for the
minute and second inputs.

In either case, press

[ENTER]

to confirm the entry.

Summary of Contents for CTF878





















































































































Search results

Summary of Contents for CTF878

Reviews:

Related manuals for CTF878

Brands by name

Popular brands

GE CTF878, Programming Manual

Search results

Summary of Contents for CTF878

Reviews:

Related manuals for CTF878

Brands by name

Popular brands