manualshive.com logo in svg

GE CTF878, Programming Manual

Share
Download
GE CTF878 Programming Manual Download Page 21

Programming Site Data

1-13

February 2009

Entering Pipe 
Parameters (cont.)

     If you select a material that has the Schedule option, and you wish
     to use that alternative:

a.

The prompt asks if you wish to apply ANSI (the ANSI 
schedule). Press 

[ENTER]

 to select (or deselect) the ANSI box.

Note:

Selecting the ANSI box enables you to use the Schedule 
alternative

b.

Press the [

W

] key twice to move the prompt to the Nominal 

pipe size drop-down menu. Press 

[ENTER]

 to open the menu. 

Scroll to the desired pipe size, and press 

[ENTER]

 to confirm 

your choice.

c.

Press the [

X

] key to move the prompt to the Schedule drop-

down menu. Press 

[ENTER]

 to open the menu. Scroll to the 

desired schedule,  and press 

[ENTER]

 to confirm the choice.

•

To confirm the entries and return to Operate Mode, press 

[F3]

 

(OK). 

•

To leave the window without confirming the entries, press 

[F2]

 

(Cancel) or the 

[ESC]

 key.

In either case, the CTF878 returns to Operate Mode.

Summary of Contents for CTF878





















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands