GE CTF878, Programming Manual

Page: 76 / 116

February 2009
4-2 Programming Meter Settings
Entering the Meter Menu
(cont.)
To scroll to a particular option, press the [
T
] or [
S
] arrow keys until
you reach the option. Then press
[ENTER]
to open the option window.
When entering parameters in an option, press:
•
The [
T
] key to step through the available parameters
•
The [
S
] key to scroll back to a previously entered parameter
•
The
[F2]
key (Cancel) or the
[ESC]
key to exit an option at any time
and return to Operate Mode without changing the parameters.
Selecting Measurement
Units
The first option, Units, enables you to select either English or Metric
units as global measurement units for the CTF878. The selected units
then become the default settings for every measurement that has the
option for metric/English units. To select the units, scroll to the Units
entry on the Meter menu and press
[ENTER]
. The Meter Settings
window opens, as shown in Figure 4-2 below.
Figure 4-2: Meter Settings Window
1.
Use the [
W
] and [
X
] keys to scroll between English and Metric
units.
2.
Press
[ENTER]
to confirm the choice.
OK Cancel
2003/08/08
6:56:17 AM
English
Date:
Time:
Pressure Units:
MMHG
Units
Meter Settings
Metric