GE AquaTrans AT868, User Manual

Page: 54 / 158

Programming Site Data 2-29
September 2004
Setting Up the Analog
Output Scale (cont.)
5.
At
BASE
, enter a flow rate value for the low end of the analog
output range by using the arrow keys. Press [
W
]
and [
X
] to move
the cursor to desired location and press
[
S
]
and
[
T
]
to increase
or decrease the number and press
[ENTER]
.
6.
At FULL, enter a flow rate value for the high end of the analog
output range by using the arrow keys. Press [
W
]
and [
X
] to move
the cursor to desired location and press
[
S
]
and
[
T
]
to increase
or decrease the number and press
[ENTER]
.
7.
At Error handling, press [
X
] to select the desired option for
handling errors (
HOLD, LOW, HIGH
, or
OTHER
) and press
[ENTER]
.
8.
If
OTHER
is selected, the
Forced milliamps
display appears. This
allows the user to impose a set value for this option. Enter the
desired forced milliamps by using the arrow keys. Press [
W
]
and
[
X
] to move the cursor to desired location and press
[
S
]
and
[
T
]
to increase or decrease the number and press
[ENTER]
.
Procedure Options
After completing the above steps, the user program returns to the
Global I/O
window. Do one of the following:
•
To continue regular programming, refer to Appendix A, Menu
Maps , to navigate to the desired menu.
•
To leave the user program, press
[ESC]
four times.