GE AquaTrans AT868, User Manual

Page: 45 / 158

September 2004
2-20 Programming Site Data
Procedure Options
After completing the previous steps, the user program returns to the
Advanced Feature
window. Do one of the following:
•
To continue regular programming, refer to Appendix A, Menu
Maps , to navigate to the desired menu.
•
To leave the user program, press
[ESC]
five times.
Activating Mass Flow -
MASS
Use this option to calculate mass flow from a static fluid density.
Complete the following steps to enter the static density of the fluid:
1.
Press
[ESC]
,
[ENTER]
,
[ESC]
. The meter enters the user program.
2.
Press [
X
] until
PROG
appears and press
[ENTER]
.
3.
Press [
X
] until the desired channel appears. Press
[ENTER]
at
CH1
or
CH2
.
4.
Press [
X
] until
SETUP
appears and press
[ENTER]
.
5.
Press [
X
] until
ADVAN
appears and press
[ENTER]
.
6.
Press [
X
] until
MASS
appears and press
[ENTER]
.
7.
Press [
X
] to select whether to activate or deactivate mass flow
(mass flow is calculated from a static density) and press
[ENTER]
.
Note:
If you select
NO
, go to Procedure Options below.
8.
Enter the fluid density by using the arrow keys. Press [
W
]
and [
X
]
to move the cursor to desired location and press
[
S
]
and
[
T
]
to
increase or decrease the number and press
[ENTER]
.
Procedure Options
After completing the above steps, the user program returns to the
Advanced Feature
window. Do one of the following:
•
To continue regular programming, refer to Appendix A, Menu
Maps , to navigate to the desired menu.
•
To leave the user program, press
[ESC]
five times.