CE marking
The CE marking and the corresponding EC Declaration of Conformity is valid for the in-
strument when it is:
•
used as a stand-alone unit, or
•
connected to other products recommended or described in the user documentation,
and
•
used in the same state as it was delivered from GE, except for alterations described
in the user documentation.
International standards
This product fulfills the requirements of the following standards:
Notes
Description
Standard
EN standard is
harmonized with EU
directive 2006/95/EC
Safety requirements for
electrical equipment for mea-
surement, control, and labora-
tory use.
EN 61010-1, IEC
61010-1, UL 61010-1,
CAN/CSA C22.2 No.
61010-1
EN standard is
harmonized with EU
directive 2004/108/EC
Electrical equipment for
measurement, control and
laboratory use - EMC require-
ments
EN 61326-1, IEC
61326-1
(Emission according to
CISPR 11, Group 1,
class A)
EN ISO standard is
harmonized with EU
directive 2006/42/EC
Safety of machinery. General
principles for design. Risk
assessment and risk reduction.
EN ISO 12100
WARNING
This is a Class A product. In a domestic environment, this product
may cause radio interference, in which case the user may be re-
quired to take adequate measures.
10
ÄKTA start Maintenance Manual 29-0603-08 AC
1 Introduction
1.3 Regulatory information
