![background image](http://html1.mh-extra.com/html/ge/af-650-gp-series/af-650-gp-series_design-manual_3944486168.webp)
9 Options and Accessories
GE offers a wide range of options and accessories for AF-650 GP.
9.1.1 Mounting of Option Modules in Slot A
Slot A position is dedicated to Network options. For further information, see separate operating instructions.
9.1.2 Mounting of Option Modules in Slot B
The power to the frequency converter must be disconnected.
It is strongly recommended to make sure the parameter data is saved (i.e. by DCT10 software ) before option modules are inserted/removed from the drive.
•
Remove the Keypad, the terminal cover, and the Keypad frame from the frequency converter.
•
Fit the OPCxxx option card into slot B.
•
Connect the control cables and relieve the cable by the enclosed cable strips.
* Remove the knock out in the extended Keypad frame, so that the option will fit under the extended Keypad frame.
•
Fit the extended Keypad frame and terminal cover.
•
Fit the Keypad or blind cover in the extended Keypad frame.
•
Connect power to the frequency converter.
•
Set up the input/output functions in the corresponding parameters, as mentioned in the section
General Technical Data
.
Unit Sizes 12, 13 and 23
Unit Sizes 15, 21, 22, 24, 31, 32, 33 and 34
AF-650 GP Design Guide
167
9
Summary of Contents for AF-650 GP Series
