GE Security DisplayKEY Pocket Manual Download

Page: 33 / 84

Chapter 3

Updating

We recommend that you place your DisplayKEY
in the cradle each night to ensure that your key is
updated and fully charged the next morning.

Manual eSYNC

You can perform a manual eSYNC at any time to
update your DisplayKEY and upload your
showing activity into the KIM network.

To perform a manual eSYNC, do the following:

1. Press

Enter

to turn on your

DisplayKEY.

2. Scroll to the MANUAL ESYNC menu

option and press

Enter

3. Place your DisplayKEY in the cradle.

The cradle light turns green, indicating that the
DisplayKEY and cradle are connected. When
the cradle light turns red, the cradle is connected
to KIM.

CAUTION:

Do not remove the DisplayKEY from

the cradle when the cradle light is red!

Summary of Contents for DisplayKEY





















































































Search results

Summary of Contents for DisplayKEY

Reviews:

Related manuals for DisplayKEY

Brands by name

Popular brands

GE Security DisplayKEY, Pocket Manual

Search results

Summary of Contents for DisplayKEY

Reviews:

Related manuals for DisplayKEY

Brands by name

Popular brands