GE Security DisplayKEY, Pocket Manual

Page: 70 / 84

DisplayKEY
Pocket Guide 62
through a phone line, make sure your
phone line is analog and not digital. If
your cradle connects to KIM through the
Internet, verify that your Internet
connection is active.
2. If your cradle is connected to a phone
line, check the eSYNC number in your
DisplayKEY by selecting the ESYNC
PHONE # option on your key. Check to
see if you need a dialing prefix such as a
1 for long distance or a 9 to access an
outside line.
3. Reset the DisplayKEY cradle (see
Cradle is not responding below for
instructions).
Cradle is not responding
If you place your DisplayKEY in the cradle and
no lights illuminate on the cradle, you need to
reset the cradle. Use one of the following
methods to reset your cradle:
• Disconnect the cradle’s power cord for
ten seconds.
• Insert one end of a paper clip into the
reset opening on the back of the cradle.