Copyright
Copyright © 2006, GE Security Inc. All rights reserved.
This document may not be copied or otherwise reproduced, in
whole or in part, except as specifically permitted under US and
international copyright law, without the prior written consent
from GE.
Document number:
43670-01
(July 2006).
Disclaimer
THE INFORMATION IN THIS DOCUMENT IS SUBJECT TO CHANGE
WITHOUT NOTICE. GE ASSUMES NO RESPONSIBILITY FOR INAC-
CURACIES OR OMISSIONS AND SPECIFICALLY DISCLAIMS ANY
LIABILITIES, LOSSES, OR RISKS, PERSONAL OR OTHERWISE,
INCURRED AS A CONSEQUENCE, DIRECTLY OR INDIRECTLY, OF
THE USE OR APPLICATION OF ANY OF THE CONTENTS OF THIS
DOCUMENT. FOR THE LATEST DOCUMENTATION, CONTACT YOUR
LOCAL SUPPLIER OR VISIT US ONLINE AT WWW.GESECU-
RITY.COM.
This publication may contain examples of screen captures and
reports used in daily operations. Examples may include ficti-
tious names of individuals and companies. Any similarity to
names and addresses of actual businesses or persons is entirely
coincidental.
Trademarks
and patents
GE and the GE monogram are registered trademarks of General
Electric. Supra is a registered trademark of GE Security.
Other trade names used in this document may be trademarks or
registered trademarks of the manufacturers or vendors of the
respective products.
Intended use
Use this product only for the purpose it was designed for; refer
to the user documentation. For the latest product information,
visit us online at
www.gesecurity.com
.
FCC compliance
Part 15 information.
This equipment has been tested and
found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful
interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to
radio communications.
Changes or modifications not expressly approved by the
party responsible for compliance could void the user’s
authority to operate the equipment.
Part 68 information.
This equipment complies with Part 68
of the FCC Rules and the requirements adopted by ACTA. On
the bottom of the enclosure of this equipment, a label
contains a product identifier in the format
US:AAAEQ##TXXXX. If requested, this information must be
provided to your telephone company.
The plug and jack used to connect this equipment to the
premises wiring and telephone network comply with the appli-
cable FCC Part 68 rules and requirements adopted by ACTA. A
compliant telephone cord and modular plug is provided with this
product. It is designed to be connected to a compatible modular
jack that is also compliant. See installation instructions for
details.
Summary of Contents for DisplayKEY
