GCC Technologies P3-132S, User Manual

Page: 78 / 179

Puma III User Manual
Trouble Shooting 7-1
Chapter 7 Trouble Shooting
This chapter is to help you correct some common problems you may come across. Prior to
getting into the details of this chapter, please be sure that your application environment is
compatible with the cutting plotter.
Possible Causes:
7.1 Non-Operational Problems
Check the following first:

Does the AC power cord plug in properly?

Does the AC power cord connected to the power connector properly?

Does the power LED still illuminate?
Solutions:
If the LCM is able to display the message, the cutting plotter should be in a normal
condition. Switch off the cutting plotter and turn it on again to see if the problem still
existing.
If the LCM is not able to display any message, contact the technician from your dealer.
Note:
Before having your cutting plotter serviced, please
make sure that the malfunction is in your cutting
plotter, not the result of an interface problem or a
malfunction in your computer or a software problem.
Why doesn’t the cutting plotter operate?