GCC Technologies P3-132S, User Manual

Page: 76 / 179

Puma III User Manual
Basic Maintenance 6-1
Chapter 6 Basic Maintenance
This chapter explains the basic maintenance (i.e. cleaning the cutting plotter)
required for the cutting plotter. Except for the below mentioned, all other
maintenance must be performed by a qualified service technician.
6.1 Cleaning the Cutting Plotter
In order to keep the cutting plotter under good condition and best performance,
you need to clean the machine properly and regularly.
Precaution in Cleaning
Recommended Methods

Gently wipe the cutting plotter surface with a lint-free cloth. If necessary,
clean with a damp cloth or an alcohol-immersed cloth. Wipe with water to
rinse off any residue and dry with a soft, lint-free cloth.

Wipe all dust and dirt from the tool carriage rails.

Use a vacuum cleaner to empty any accumulated dirt and media residue
beneath the pinch roller housing.

Clean the platen, paper sensors and pinch rollers with a damp cloth or an
alcohol-immersed cloth, and dry with a soft, lint-free cloth.

Wipe dust and dirt from the stand.

Unplug the cutting plotter before cleaning

Never use solvents, abrasive cleaners or strong
detergents for cleaning. They may damage the surface of
the cutting plotter and the moving parts.