GCC Technologies P3-132S, User Manual

Page: 74 / 179

Puma III User Manual
Automatic-Aligning System 5-7
Step 2 Placing the Registration Marks

The AAS Layout Instruction:
* Auto-detection function on the 1
st
mark covers the grey area

Suggested 30mm margin on both left and right sides of media sheet.

Suggested 20~30mm margin on top of media sheet, and at least 50mm margin on
the bottom edge to prevent sheets dropping or any error occurred while media sizing.
Step 3 Print the Graphics
■ Print the graphic and the marks with your printer
(Scaling = 100%).
■ When printing on a roll media, make sure the orientation as following: