GCC Technologies LaserPro Venus II, User Manual

Page: 87 / 118

- 87 - 232001280G(13)
•
Relative:
This mode sets the current laser head position to correspond to the origin (top left)
position of the graphic software. Therefore, the laser head will process the job from its current
position relative to its setting in the graphics software.
•
Center:
Sets the current position of the laser head as the center point for your subsequent job.
As an example, if the subsequent job is to vector cut a circle and you have the Position Mode set
to Center, then the Spirit Series will vector cut a circle around the initial position of the laser head.
•
SmartCENTER:
The SmartCENTER function is a quick and easy way to precisely locate the
center point between two points or four points.
Tip
It is highly recommended you enable the red dot laser pointer when setting / adjusting the
Position Modes, as this makes accurate positioning of your laser carriage for your particular
jobs much easier.
Tip
The SmartCENTER function is a quick and easy way to precisely locate the
center point between two points or four points. It is a great tool for users
whose jobs often require engraving on specific locations such as on award
signs and plaques.
Image Output Direction (Advanced Page) [DEFAULT SETTING: Top to Bottom]