GCC Technologies LaserPro Venus II, User Manual

Page: 78 / 118

- 78 - 232001280G(13)
DPI Setting 200 250 300* 500 600* 1000 1500
Actual
DPI
200 254 381 508 762 1016 1524
NOTE
Outputting a full-table (11.8
”x8.26") job using 300 or 600 DPI will result in a truncation
error; this is due to the large differences in set DPI vs. actual DPI output for those two
particular DPI settings. Therefore, when processing a 11.8"x8.26" job using 300 DPI,
we recommend you move to the next higher DPI setting of 380. Similarly, for a
11.8"x8.26" job using 600 DPI, we recommend you use 760 DPI.
Mirror (Options Page) [DEFAULT SETTING: Unselected]
Checking this box will automatically engrave your image with a mirrored effect. This setting will
flip the image along the Y-axis from left to right and vice-versa.
Tip
When engraving a stamp, via the stamp mode, the stamp image needs to be
engraved in reverse (mirrored) for the final stamp to be correctly laid out.
Invert (Options Page) [DEFAULT SETTING: Unselected]
Checking this box automatically inverts / reverses the color of your image (the white areas
become black and vice versa). The Invert option is not available if disabled while Manual Color
File mode is selected.
Tip
Invert mode is useful when creating a stamp in Stamp Mode, as inverting your
normal image will set the negative space to be engraved out, with the
remaining positive space (your stamp design) protruding out.