GCC Technologies LaserPro Venus II, User Manual

Page: 45 / 118

- 45 - 232001280G(13)
LED INDICATOR LIGHTS
Three indicator lights on the LaserPro VENUS
’s control panel are part of the system’s safety
interlock system.

DOOR - The door light will illuminate when any of the following doors or function is not
working properly. The top lid, the pass through doors, the rear laser access panel and the
water flow sensors that ensures the flow of cooling water.

POWER - The power light will illuminate when the LaserPro VENUS is powered on.

LASER - The laser light will illuminate when the laser is active and in operation.
WARNING

DO NOT attempt to remove or modify any component of the safety interlock
system.

If at any time, any of the access doors are open and the “laser” LED is
illuminated,
IMMEDIATELY unplugs the laser system and contact GCC
technical support for service instructions.

DO NOT operates the laser system if any component of the safety system is
malfunctioning.
DIRECTIONAL AND SELECTION BUTTONS
Function (F1 / F2 / F3 / F4)
– Four function buttons allow you to select various functions, which
will
change depending on what section of the menu you are in. Each function button’s
corresponding function will be displayed right above its respective button on the LCD display
screen. Please note that in certain menus, not every function button will always be mapped to a
corresponding action. In these situations, that particular button will not have a function.
LED Indicator Lights
LCD Display Screen
Function Buttons
Directional and
Selection Buttons