GCC Technologies LaserPro C180II, User Manual

Page: 124 / 141

124 232001840G(08)
OPERATION MENU:
After hardware installation, please enter the function menu on the control panel to enable the
SmartGUARD fire alarm.
SmartGUARD Enable / Disable:
Press directional key (left or right) to enable the SmartGUARD device or disable it.
Sensitivity:
Press directional key (left or right) to set the sensitivity of SmartGUARD. There are five sensitivity
settings (1,3,5,7,9 seconds) that can be selected. Sensitivity defines the time from when a fire is
detected until the fire alarm alerts user of fire and automatically shuts down the laser from firing.
For example, if the sensor delays switch is set to the 3-second position, the SmartGUARD will start
an alarm and automatically stop laser firing after detecting a fire for 3 seconds.
Navigating to this page:
Main Work Page
Functions Page
press F4
Machine Setting Page
Select< Adv anced
Options >from the
SmartGUARD Setting Page
Select<SmartGUARD
Setting> from the menu
Connect the cable shown