GCC Technologies LaserPro C180II, User Manual

Page: 106 / 141

106 232001840G(08)
Concept illustration of 3D graphic production with Laser Professional AP
After the graphic is completed, you can output the 3D graphic directly to the laser machine through GCC LaserPro
driver, which is very handy. Or you can also export the 3D graphics as JPG or BMP format and edit with
frequently used CorelDRAW or Illustrator software, then output the graphic to GCC laser system.
Photoshop & CorelDRAW
The way to produce 3D graphics with Photoshop and CorelDRAW is very similar. Fill in the desired gray level
colors to each of the drawn figures, and proceed with further arrangement and combination. Then you may output
the 3D graphic to the laser for the production of the 3D object. Take the figure below as an example. After
producing two graphs in gray level, proceed with the arrangement and combination. Then you may let the laser
proceed with 3D mode.
Both Photoshop and CorelDRAW may produce 3D graphics in the manner of combination.
A way to produce 3D graphics
For the production of 3D graphics, in addition to the requirement of having great familiarity with the software, a
significant amount of time is required to design and arrange the layout. Thus, we use a relatively simple graphic
for illustration so that you would understand how to produce 3D graphics better.
Take the graphic above as a production example. CorelDRAW is used for the production of the 3D graphic.
Step 1. Produce the gray level background