GCC Technologies JF-2418UV, User Manual

Page: 74 / 182

JF-2418UV User Manual
73
The size of the margin. The margin is the part of the panel that extends
outside of the boundaries of the job.
Selected tile Selects which tile's width and height display in the fields below.
Selects a tile to edit. The selected tile highlights in the preview pane.
Shows the width and height of the selected tile. To adjust, enter a number
or use the arrows.
Print Check to output the selected tile with the rest of the job.
Clear to prevent output by marking the tile with a mesh overlay in the preview pane
All tiles These settings apply to all tiles and help you quickly set up automatic tiles of equal size.
Selecting this option divides the job vertically into the number of columns
specified. Each column is of equal width.
Selecting this option divides the job into the number of rows specified. Each
row is of equal height.
Enter the values for the width and height of the tiles here. All tiles change to
the specified size.
Set the amount of overlap between tiles. Enter a negative number to create an
offset between tiles.
Reset Restores the default settings.
Automatic tile flip Check to rotate every other printed tile 180° so that adjacent vertical edges
always print with the same side of the print head. This helps them match up
cleanly.
Dividing a Job into Uniform Rows and Columns of Tiles
1. Check the or fields to tile the job vertically or horizontally into evenly divided columns
or rows