GCC Technologies JF-2418UV, User Manual

Page: 132 / 182

JF-2418UV User Manual
131
parameter tuning.
Print Settings
VWKCMY Open/Close print head channel
UV lamp curing mode Normal Curing
Delay Curing
UV Power UV power adjustment 0~100
Print Speed Level Print speed adjustment Level 1~5
Enable Static bar Enable the static bar
Enable job repeat
function
Set number of job repeats 1~999
Enable compensate color offset by print head gap
Enable job repeat
function with roll
media
Set number of job repeats when printing
on roll media with roll to roll system
1~999
Distances between two jobs Max.: 500mm
Negative Pressure
Reset to Zero Reset negative pressure to 0 kap
Set kpa Negative pressure settings
Check engine board
version
Read engine board version
Job Ink Use
VWKCMY /CC/Price/L Check ink consumption and print time of
a file
PH PARAMETERS Ink jet print head parameter settings
Channel
K
、
C
、
M
、
Y
、
V
、
W ink jet head color name
Drop/Speed m/s Ink jet head drop speed adjustment
Default Voltage Ink jet head voltage adjustment
MACHINE PARAMETERS
Write Parameters to
machine
Send the parameter settings to machine
Parameters backup
from machine
Retrieve parameters backup from
machine
MB VERSION
Read Read M/B version info.:
Motion Firmware Version
Motion FPGA Version
Ink ID Board Version
Engine Board Version