- 16_en -
sl320001604 ed.06 - 03-2010
Set the bowl back in place; slightly raise head
(C)
of the auger so that it meets
the seat provided
(E)
in the bowl.
Fig.32
Press the bowl downward until it engages the surface as shown in the figure.
Fig.33
follow these instructions to refit the tap:
1 adequately lubricate the plug
(X)
and OR
(Y)
using the Vaseline supplied and
reassemble the components;
2 introduce the pin
(F)
while keeping the tap lever steady.
F
Y
X
Fig.34
Note: failure to lubricate the plug or oR may cause product to
leak from the tap.
Fig.35
Note: Correctly install the components as shown in the figure.
7.7. Cleaning the drip tray
The drip tray should be emptied and cleaned daily.
Note: all of the drip trays present in the machine should be
cleaned.
The drip tray should be emptied and cleaned daily (see fig.32).
Holding the drainage hose firmly, lift the tray with the grid on top of it and pull
it out.
7.6. Rinsing cycle
Before starting up the machine, you must carry out the rinsing cycle.
Proceed as follows:
1 fill the tank with clean water;
2 let the machine on for 5 minutes in the “agitation” mode only;
3 turn off the machine and empty the tank by opening the tap.
Wash the tray and grid separately with lukewarm water.
Dry all of the components.
Reposition the grid on top of the tray.
Position the drainage hose in the opening provided.
Fit the tray back in place and press down to secure it to the machine.
Summary of Contents for Granitore 1
Page 47: ...SL320001604 Ed 06 03 2010 23_ES...
Page 69: ...SL320001604 Ed 06 03 2010 23_EN...
Page 91: ...SL320001604 Ed 06 03 2010 23_DE...
Page 113: ...SL320001604 Ed 06 03 2010 23_FR...
