![background image](http://html1.mh-extra.com/html/gbc/f-60h/f-60h_operation-and-maintenance-manual_3941968088.webp)
Page 6 - 26
© April 2001 General Binding Corporation
Applications
F 60 H Operation and Maintenance Manual
PROCESS CONTROL CHART
Materials - PSA Single sided lamination ( craft paper method)
Top material : Roll of pressure sensitive laminate
Bottom material : Roll of craft paper
Other material (s) : Prints
CAL 3200
CAL 3200
Motor Direction
Motor Speed
1
2
3
4
5
6
7
8
9
10
range
Roller Pressure
Upper Roller Temperature
Heater
RANGE
Notes: Top and bottom material should be of the same width. Do not use excessive brake
tension for this application. Speed should be comfortable for the operator. Pressure will
vary depending on the width and weight of the image and laminate. Heat is optional.
Some heat will assist the flow of adhesive. Refer to helpful hints for pressure sensitive
films.
RANGE