![background image](http://html1.mh-extra.com/html/gbc/f-60h/f-60h_operation-and-maintenance-manual_3941968080.webp)
Page 6 - 18
© April 2001 General Binding Corporation
Applications
F 60 H Operation and Maintenance Manual
PROCESS CONTROL CHART
Materials - Lo-Melt Decaling
Top material : Roll of Lo-Melt film
Bottom material : Roll of pressure sensitive adhesive
Other material (s) : prints
CAL 3200
CAL 3200
Motor Direction
Motor Speed
1
2
3
4
5
6
7
8
9
10
rang
e
Roller Pressure
Upper Roller Temperature
Heater
RANGE
Notes : Speed will be dependent on the activation of the Lo-Melt adhesive. If the output
appears cloudy or milky, reduce the speed. Pressure will vary depending on the weight
and width of the image and laminate. For thinner laminates, use the 180 oF ( 82 oC ) and
for thicker films, use the 200 oF ( 93 oC ).
RANGE