![background image](http://html1.mh-extra.com/html/gbc/f-60h/f-60h_operation-and-maintenance-manual_3941968018.webp)
Page 1 - 6
Safety
F 60 H Operation and Maintenance Manual
© April 2001 General Binding Corporation
A b ou t recyclin g: T h e crate com p on en ts can
b e reu sed for sh ip p in g th e lam in ator again
or can b e d isassem b led an d th e w ood an d
screw s recycled . T h e sh rin k w rap is n ot
recyclab le, so it m u st b e d iscard ed .
IN F O R M A T IO N
C A U T IO N
D o n o t m ove th e levelin g n u t w h en secu rin g
th e in sid e n u t to th e cab in et.
Y ou w ill need the control side cabinet cover
off to connect the electrical pow er.
IN F O R M A T IO N
ELECTRICAL
S H O C K
Only a qualified electrician should connect
power to the laminator. You can be severely
shocked, electrocuted or cause a fire if
power is improperly applied.
W A R N I N G
Follow the correct wiring diagram when
supplying power to the laminator. If
improperly connected, you can be seriously
injured or cause damage to the laminator.
W A R N I N G
Do not wear ties, loose fit clothing or
dangling jewelry while operating or
servicing the laminator. These items can get
caught in the nip and choke you or you can
be crushed or burned.
W A R N I N G
If a safety feature is not working
properly, contact your local service
representative immediately.
C A U T IO N
D o n ot use a hard substrate or a substrate
w ith sharp edges. Y ou m ay cause dam age to
the lam inating rollers!