![background image](http://html1.mh-extra.com/html/gbc/f-60h/f-60h_operation-and-maintenance-manual_3941968047.webp)
Page 4 - 13
Installation
F 60 H Operation and Maintenance Manual
© April 2001 General Binding Corporation
4.10 Safety check
The safety check will ensure that all safety devices
and interlocks are functioning properly.
This procedure describes how to check one
E-STOP and the PHOTO-EYE. Repeat the steps for
the remaining three E-STOPS. ALL SAFETY
FEATURES MUST BE CHECKED!
W A R N I N G
Do not wear ties, loose fit clothing or
dangling jewelry while operating or
servicing the laminator. These items can get
caught in the nip and choke you or you can
be crushed or burned.
W A R N I N G
If a safety feature is not working
properly, contact your local service
representative immediately.
Contacts:
GBC National Service: ( 800 ) 790 - 7787
My service rep:_____________________
E-STOPs
a) Turn MAIN POWER to ON .
POWER
On
Off
b) Press RESET. The power indicator on the front
control panel will be illuminated.
PO
WER
Reset
c) Press the motor direction to FORWARD.
(reverse)
(forward)