![background image](http://html1.mh-extra.com/html/gbc/f-60h/f-60h_operation-and-maintenance-manual_3941968051.webp)
Page 5 - 1
Operations
F 60 H Operation and Maintenance Manual
© April 2001 General Binding Corporation
5.0 Operations
In this section you will find information on how to
properly turn your Falcon 60 H Laminator on, learn
functions of the control panel, increase and decrease
temperature, properly load and unload film, use of the
unwind brake tensioning system, rewind brake tensioning,
how to manually set the nip for mounting, and foot switch
function.
The following general rules should always be
adhered while operating this machine.
W A R N IN G
D o not w ear ties, loose fit cloth ing or
dangling jew elry w hile operating or
servicing the lam inator. T hese item s can get
caugh t in the nip and choke you or you can
be cru shed or burned.
IN F O R M A T IO N
T he m achine w ill only operate if all
four em ergency stops are unlatched and
R E SE T has been p ressed.
It is un safe to sheet feed w ithout the
pressu re plate properly placed on
the front feed table.
W A R N IN G
W A R N IN G
W hen the lam inator rollers are in
m otion , keep hand s and fingers
aw ay from the nip of the rollers.
Y ou m ay be C R U S H E D or B U R N E D !
W A R N IN G
K eep h ands and fingers clear of the
lam inator roller n ip w hen changing G A P.
Y ou can be C R U S H E D or B U R N E D !
W A R N IN G
W hen operating th e lam inator using the
footsw itch, keep h ands and fin gers aw ay
from the nip of th e rollers.
Y ou m ay be C R U S H E D or B U R N E D !
W A R N IN G
D o n ot operate the lam in ator, except
durin g w eb set up, w ithout the front
and rear feed tables in p osition.