Page 5 - 10
Operations
F 60 H Operation and Maintenance Manual
© April 2001 General Binding Corporation
5.7 Setting the nip
Setting the nip is made easy when it comes to
performing a mounting application. Pressure will vary with
regards to the types of substrate being used. An incorrect
nip setting can cause complications with output quality.
For safe nip setting, always adhere to the following
rules listed below.
W A R N IN G
K eep hands an d fingers clear of th e
lam in ator roller nip w hen adjusting nip.
Y ou can be C R U SH E D or B U R N E D !
C A U T IO N
E xcess pressure can dam age the lam inating
rollers. A lw ays use the m inim um roll
pressure necessary to com plete th e task.
C A U T IO N
O bjects other than m edia, film or approved
substrates, w ill cause irreparable dam age
to the rollers if caught in the nip.
a) Ensure all E-STOPs are unlatched, power is on
and RESET has been pressed.
1
/4
tu
rn
POWER
Reset
On
b) Set the motor direction to REV.
(reverse)
(forward)
c) Set a comfortable speed for the application you
are performing.
1
2
3
4
5
6
7
8
9
10
