Page 6 - 24
© April 2001 General Binding Corporation
Applications
F 60 H Operation and Maintenance Manual
PROCESS CONTROL CHART
Materials - PSA Single sided lamination ( sled method)
Top material : Roll of pressure sensitive laminate
Bottom material : N/A
Other material (s) : Images, leader board, trailer board and a pre-coated board
CAL 3200
CAL 3200
Motor Direction
Motor Speed
1
2
3
4
5
6
7
8
9
10
range
Roller Pressure
Upper Roller Temperature
Heater
RANGE
Notes : The leader board and trailer board should be the same width as the pre-coated
board. The laminate should not exceed the pre-coated board by more than 1 in. ( 2.54 cm ).
Do not use excessive brake tension for this application. Pre-coated board is reusable
since the laminate does not bond with the release liner from the pressure sensitive
adhesive. Speed should be comfortable for the operator. Pressure will vary depending on
the type of substrate. Heat is optional. Some heat will assist the flow of adhesive. Refer to
helpful hints for pressure sensitive films.
RANGE
