Page 8 - 3
Maintenance
F 60 H Operation and Maintenance Manual
© April 2001 General Binding Corporation
c) Set motor direction to REV.
(reverse)
(forward)
d) For pressure sensitive adhesives: put the rubber
gloves on and use isopropyl alcohol and a
terry cloth towel to rub the adhesive off.
CAUTION
Excessive pressure can destroy the silicone
layer by pressing to hard or scrubbing
too long in one spot.
e) For thermal adhesives: while the laminator is at
normal operating temperature, put on the rubber
gloves and use the rubber cement eraser. This
allows the eraser to bead up the adhesive.
f) Wipe away the beads with isopropyl alcohol
and a cotton terry cloth.
CAUTION
Exercise care when cleaning the laminating
rollers with 80% isopropyl alcohol:
Use only in a well ventilated area
Wear rubber gloves
Use only on cool rolls
C L E A N I N G H E A T E D R O L L E R S C A N
I G N I T E T H E F U M E S !
CAUTION
Do NOT pick or pull heat activated adhesive
off the rolls when they are cold. You can
cause irreparable damage to the
laminating rolls.
W A R N IN G
W h en op eratin g th e lam in ator u sin g th e
footsw itch , keep h an d s a nd fin gers
aw ay from th e n ip of th e rollers.
Y ou m ay b e C R U S H E D or B U R N E D !
d) Use the footswitch to rotate the rollers when
finished cleaning that area.
