42
REMOVING THE COVER
!
WARNING!
The cover is an integral component
of the car seat's safety design. The car seat must
therefore never be used without the cover.
Removal
The cover consists of 7 components fixed to the seat
shell by hook and loop fastener, elastic piping, snap
buttons and brackets. Once you have released all the
fastenings, you can remove the individual components
for washing.
Proceed as follows:
•
Open the belt buckle
20
of the 5-point belt system.
•
Open all snap buttons of the pads and cover parts
25
.
•
Unhook the shoulder pads from the brackets
26
.
•
Remove all belt pads.
•
Thread the shoulder belts out of the cover.
•
Remove the cover by pulling it forwards.
•
To fix the cover again on the seat carry out the steps in
reverse order.
26
20
25
NOTE!
Before detaching the cover please pull out the
elastics under silver decorative parts to avoid damage.
NOTE!
When remounting the shoulder pads, it is
essential to ensure that ...
•
the closed side faces towards the childs neck.
•
the shoulder pads are perfectly mounted on the
brackets
26
.
•
the shoulder belts are guided inside the shoulder pads.
