Gateway Solo 3100, User Manual

Page: 52 / 94

48 Using Your Gateway Solo 3100 Notebook
1.
Plug the connector from your existing network bus into the RJ45
connector at the end of the 10BASE-T cable, and plug the 15-pin
connector from the 10BASE-T cable into the modem. Plug the other
end of the telephone cable into the wall jack.
- OR -
1. If your network PC Card has the XJACK connector, gently push on the
end of the XJACK to release it, then plug one end of the telephone
cable (RJ11) into the XJACK connector.
2.
Plug the other end of the phone cable into the wall jack.
To install the modem
Important!
If you have trouble plugging
in the 15-pin connector,
turn it over so that the arrow
is on top.