Gateway Solo 3100 User Manual Download Page 51

Page: 51 / 94

Chapter 4: Getting Online 47

The Add New Hardware Wizard appears. Select

Search for the best

driver for your device

, then click

Next

Select

Floppy disk drives

, insert the driver diskette into the diskette drive,

then click

Next

Click

Finish

. Dual-toned beeps indicate that the modem is enabled.

Installing Your Network Modem

The network PC Card modem has a 64-pin connector on one end and an
RJ45 (Ethernet) connector on the other end.

The combo PC Card modem (A) shown below has the 68-pin connector on
one end and two ports (B, D) on the other end. The two ports include:

♦

A 15-pin connector port that can be used with a 10BASE-T Ethernet
cable with a 15-pin connector (B) on one end and a RJ45 connector
(C) on the other end.

♦

A 15-pin connector (D) on one end and an RJ11 connector (E) on the
other end for regular telephone lines.

Summary of Contents for Solo 3100































































































Search results

Summary of Contents for Solo 3100

Reviews:

Related manuals for Solo 3100

Brands by name

Popular brands

Gateway Solo 3100, User Manual

Search results

Summary of Contents for Solo 3100

Reviews:

Related manuals for Solo 3100

Brands by name

Popular brands