Gateway Solo 3100 User Manual Download | Manualshive

Page: 83 / 94

background image

79

Regulatory Compliance Statements

This device has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio or television reception. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause interference to radio and television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:

♦

Reorient or relocate the receiving antenna

♦

Increase the separation between the equipment and receiver

♦

Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected

♦

Consult the dealer or an experienced radio/TV technician for help.

Accessories: This equipment has been tested and found to comply with the limits
of a Class B digital device. The accessory associated with this equipment is the
shielded power cord.

This accessory is required to be used in order to ensure compliance with FCC
rules.

This digital apparatus does not exceed the Class B limits for radio noise emissions
from digital apparatus as set out in the radio interference regulations of Industry
Canada.

Le présent appareil numérique n’émet pas de bruits radioélectriques dépassant les
limites applicables aux appareils numériques de Classe B prescrites dans le
règlement sur le brouillage radioélectrique édicté par Industrie Canada

Attention!

Couper le courant avant l’entretien.

American Users

Caution!

The Federal
Communications
Commission warns the
users that changes or
modifications to the unit not
expressly approved by the
party responsible for
compliance could void the
user’s authority to operate
the equipment.

Canadian Users:

«
...
81
82
83
84
85
...
»

Summary of Contents for Solo 3100































































































Reviews:

No comments

Related manuals for Solo 3100

THINKPAD I 1200 -

Brand: IBM Pages: 233

Visionbook 14WR

Brand: UMAX Technologies Pages: 73

Brand: Omen Pages: 15

Brand: IBM Pages: 142

Brand: Fujitsu Pages: 99

Brand: Fujitsu Pages: 78

Brand: Humanscale Pages: 8

Brand: Trust Pages: 9

Brand: Trust Pages: 3

NOTEBOOK COOLING CHILL HUB XC

Brand: Targus Pages: 55

Brand: Targus Pages: 95

Brand: Gigabyte Pages: 133

Brand: Gigabyte Pages: 111

Brand: StarTech.com Pages: 2

Brand: StarTech.com Pages: 2

Brand: StarTech.com Pages: 2

Brand: Wipro Pages: 103

Brand: Gigabyte Pages: 9

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands