Gateway E-4100 User Manual Download

Page: 71 / 217

Protecting your computer from viruses

www.gateway.com

To remove a virus:

If Norton AntiVirus finds a virus, follow all on-screen instructions to
remove the virus.

Turn off your computer and leave it off for at least 30 seconds.

Turn on your computer and rescan for the virus.

To update Norton AntiVirus:

Make sure that you are connected to the Internet.

Click

Start

All Programs

Norton AntiVirus

, then click

LiveUpdate - Norton

AntiVirus

. The LiveUpdate wizard opens.

Follow the on-screen instructions to update your Norton AntiVirus
program with the latest virus protection files.

When the program has finished, click

Finish

Summary of Contents for E-4100


























































































































































































































Search results

Summary of Contents for E-4100

Reviews:

Related manuals for E-4100

Brands by name

Popular brands

Gateway E-4100, User Manual

Search results

Summary of Contents for E-4100

Reviews:

Related manuals for E-4100

Brands by name

Popular brands