Gartenmeister GM 4T-700, Translation Of The Original Instructions

Page: 37 / 56

33
FAILURE REMOVAL
Defect Cause Removal
Engine does not start or
starts, but does not run
further.
Wrong starting process. Refer to the instructions in these operating
instructions.
Empty fuel tank/Lack of fuel Add some fuel
Wrong fuel, storing without petrol tank
being drained
Drain the fuel tank and carburettor. Add
fresh petrol.
Wrong setting of the carburettor. Have the carburettor settings adjusted by an
authorised customer service organisation.
Sooted spark plug (carbon residues on elec-
trodes), electrodes distance too big.
Clean the spark plug, check the plug thermal
value, possibly change the plug.
The spark plug is wet from petrol (oversatu-
rated engine).
Dry the spark plug out and refit it.
Dirty air filter Clean or replace the air filter
Engine starts, but does
not run at full power.
Dirty air filter Clean or replace the air filter
Wrong setting of the carburettor. Have the carburettor settings adjusted by an
authorised customer service organisation.
Engine splutters.
Dirty air filter Clean or replace the air filter
The motor does not de-
velop maximum power
Engine does not run
smoothly.
Wrong setting of the carburettor. Have the carburettor settings adjusted by an
authorised customer service organisation.
Excessive exhaust gases
(smoke).
DISPOSAL
If your device should become useless somewhere in the
future or you do not need it any longer, do not dispose of
the device together with your domestic refuse, but dispo-
se of it in an environmentally friendly manner. Thoroughly
empty the oil/lubricant and fuel tanks and dispose of the
remainders at a special collecting point or dump. Please
also dispose of the device itself at an according collecting/
recycling point. By doing so, plastic and metal parts can
be separated and recycled. Information concerning the
disposal of materials and devices are available from your
local administration.
Never dispose of oils, fuel or other polluting materials in
unauthorised places.
Make sure the oil products do not enter the soil.
Oil products must not come into contact with skin, eyes
and clothing.
WARRANTY
For this tool, the company provides the end user - inde-
pendently from the retailer‘s obligations resulting from the
purchasing contract - with the following warranties:
The warranty period is 24 months beginning from the
hand-over of the device which has to be proved by the
original purchasing document. For commercial use and
use for rent, the warranty period is reduced to 12 months.
Wearing parts, rechargeable batteries and defects caused
by the use of non fitting accessories, repair with parts that
are not original parts of the manufacturer, use of force,
strokes and breaking as well as mischievous overloading
of the motor are excluded from this warranty. Warranty re-
placement does only include defective parts, not complete
devices. Warranty repair shall exclusively be carried out by
authorized service partners or by the company‘s customer
service. In the case of any intervention of not authorized
personnel, the warranty will be held void.
All postage or delivery costs as well as any other subse-
quent expenses will be borne by the customer.
GB ENGLISH
73046760_Motor_Freischneider_1-0.indd 33 08.12.16 11:47