background image

31

 DANGER!

Kickback can lead to casualties.
Carefully check the terrain where the appliance is going 

to be used and remove all objects that could get caught 

or thrown off by the appliance such as stones, branches, 

wires, animals, etc.
Do not use metal cutting tools near fences, metal posts, 

boundary stones, or foundations.
Stop the engine immediately if the blade stops during 

sawing. Always beware of a kickback, which could occur 

if a blade encounters a solid object (logs, roots, branches, 

stones, etc.). Do not touch the ground with the blade. 

Kickbacks cause blade recoils that are difficult to control, 

so as to cause loss of control of the machine, compromise 

operator safety and cause damage to the machine itself.
If you touch an object or get caught (with the device) 

switch off the engine immediately and check the device 

for possible damage. Repair possibly existing damages 

before you try to continue your work. Do not operate the 

trimmer if it has loose or damaged parts.

SAFETY INSTRUCTIONS FOR PETROL-POWERED TRIMMERS AND BRUSHCUTTERS

 DANGER!

 

Risk of fire! / Risk of explosion
Fuel is highly flammable.

•  Petrol and petrol vapours are highly 

flammable, explosive.

•  Do not work with the unit in an environment 

with a risk of explosion where there are 

flammable liquids, gases or dust. 

•  Never operate the unit near highly flammable 

materials.

•  Prohibited smoking and open fire using.

•  Keep the fuel in suitable containers only. Do 

not store any fuel near the unit.

The appliance may only be refuelled outdoors and not 

near open fire or burning cigarettes.
Emergency procedure
After use, let the unit cool down for at least 5 minutes 

before refuelling.
In the tank pressure may develop. Loosen the tank cap 

slowly to allow this pressure to gradually decrease.
Make sure the fuel does not overflow. If the fuel overflows, 

the engine must not be started. Remove any dirt from the 

appliance and prevent any attempt at ignition until fuel 

fumes have evaporated.
Replace all fuel tank and container caps securely.
Start the device at least three meters away from the place 

where you fuelled it. Do not smoke during fuelling or ope-

ration and take care that no sparks or open flames reach 

into the working area.
Fuel tank to be emptied outdoors only.
To keep the danger of fire as low as possible the engine 

and exhaust pipe must be free from grass, leaves and 

excess grease.
Replace the exhaust pipe and (if necessary) the spark pro-

tector if these are not in proper working order any more.
To reduce fire risks, periodically clean the cylinder flaps 

with compressed air and clear the silencer area to get rid 

of sawdust, branches, leaves or other debris.
Regularly remove any remainders of grass and weed to 

avoid an overheating of the shaft tube. Remainders of 

grass and weeds get caught under the protection cover 

avoiding a sufficient cooling of the shaft tube. Remove the 

remainders carefully with a screwdriver or a similar tool.

GB

  ENGLISH

73046760_Motor_Freischneider_1-0.indd   31

08.12.16   11:47

Summary of Contents for GM 4T-700

























































Reviews: