User’s manual maps + more
- 96 -
Car info
On the button at the bottom edge of the screen you can see whether
the indicated data are for the current trip (
Since start
) or for the period
since the data were last reset (
Long term
).
11.4.2
Selecting the period
In the
T
RIP COMPUTER
window tap on the
Period
button (it is labelled
with Since start or with Long term).
Select the period for which you want the data to be presented.
►
Since start: This period will always begin again when the ignition
has been off for 2 hours or more.
►
Long term: This period will always begin again when you press and
hold the reset button of the day odometer on the vehicle's
instrument panel for at least 5 seconds.
11.5
Status
The navigation device can show two round instruments. You can
configure which instruments are shown.
11.5.1
Opening the Status window
1. If necessary, tap on
(Main menu) to open the
S
TART
window.
2. In the
S
TART
window, tap on Car info > Status.
The
S
TATUS
window opens.
11.5.2
Configuring the Status window
The navigation device can show the following instruments:
►
RPM gauge
►
Coolant temperature
►
Outside temperature
Note:
It is possible that your vehicle does not support all the
instruments which can be shown by the navigation device. In this case
the choice will be limited.
1. In the
S
TATUS
window tap on Car info > Gauge 1 to configure the
left round instrument.
- or -
►
In the
S
TATUS
window tap on Car info > Gauge 2 to configure the
right round instrument.
- or -
►
In the
S
TATUS
window tap on the round instrument which you want
to reconfigure.
