User’s manual maps + more
Handsfree module
- 119 -
Note:
You can also choose not to have incoming text messages
announced immediately. (Refer to "Settings" on page 124)
You can however open the list of received text messages at any time to
check whether you have received any new text messages. (Refer to
"Opening the mailbox" on page 123)
13.4
Making a call
With the hands-free module you can make a call in various ways:
13.4.1
Making a call with the voice commands function
It is particularly convenient to make a call with the voice commands
function.
1. In the
H
ANDSFREE MODULE
window activate the mobile phone which
you want to use to make the call. (Refer to "Activating a mobile
phone" on page 115)
2. In the
H
ANDSFREE MODULE
window tap on Voice command.
- or -
In the
N
AVIGATION
window, in the map and if applicable in the
H
ANDSFREE MODULE
window move your hand briefly near to the
screen of the navigation device. As soon as you take your hand
away from the screen again you will hear a single prompt tone.
►
Then say "Call".
The
V
OICE COMMAND
window opens.
Specifying a phone number
3. Say "Telephone number".
Say the number that you want to call.
Note:
You have to say each number separately but you can say the
numbers in blocks. For example, say "nine-four-three-three" for the
number block 9433.
4. Wait for the numbers you said to appear.
Repeat steps 3 to 4 until the complete phone number is shown on
the display. Say "Correction" if the last number you said was not
understood correctly.
5. Say "Call".
The phone number will be dialled.
Calling a contact from the phone book
3. Say "Phone book".
4. Say the name of the contact you want to call.
