User’s manual maps + more
- 16 -
Switching the navigation device on and off
Note:
The device also switches on when it is fitted in the vehicle while
the ignition is already on.
If the navigation device was previously set to standby, the window
which was last visible will appear.
If the device was previously switched off, it will take several seconds for
the software to be started again. The
S
TART
window then appears.
If you want to switch on the device with the engine off, press and hold
the (
On/Off
) key until the device switches on.
3.1.2
Screensaver
Switching on the screensaver
The screensaver is available only under the following conditions:
The device is mounted in the vehicle and is on.
The vehicle's ignition is on.
►
Press briefly on the (
On/Off
) key.
- or -
►
In the
S
TART
window tap on
(Switch off).
The screensaver will appear. On it you can see the date, the time and
the outdoor temperature.
Using the
NAVIGON Fresh
software you can install a function which
allows you to select the picture you want to use as the screensaver.
NAVIGON Fresh
can be downloaded free of charge from the website
www.navigon.com/fresh
.
The date, the time and the outdoor temperature are shown likewise on
the picture which you selected yourself. For more details refer to the
chapter "Background for the screensaver" on page 109.
Switching off the screensaver
►
Press briefly on the (
On/Off
) key.
- or -
►
Tap anywhere on the screen.
The screensaver is phased out. The window which was active when the
screensaver was switched on is visible again.
Note:
The screensaver is also switched off automatically when you pull
out the ignition key.
