Garmin GTN 625 Page 429 Pilot'S Manual Download

Page: 429 / 610

12-3

190-01004-03 Rev. P

GTN 625/635/650 Pilot’s Guide

Nearest

12.2

Nearest Airport

The Nearest Airport page displays the identifier, symbol, bearing and distance,

and the length of the longest runway for the 25 nearest airports (within 200 NM
of your present position).

The Nearest Airport page can be configured to exclude shorter runways or

undesirable runway surface types, so that the corresponding airports do not
appear on the list. You may wish to use this feature to exclude seaplane bases,
heliports, or runway lengths which would be difficult or impossible to land
upon. Refer to

System - Setup - Nearest Airport Criteria

for information about

configuring the Nearest Airport display criteria.

1. While viewing the Nearest function, touch the

Airport

key. A

list of the nearest 25 airports within 200 NM will be listed.

Scroll Bar Indicates

More Items on the List

Airport Information

Airport

Identifier

Up/Down Keys Indicate

More Items on the List

Figure 12-3 Nearest Airport

2. Touch the

and

Down

keys to scroll through the list.

3. Touch the

Airport Identifier

key to show the Waypoint Info

page for the selected airport.

Touch a Key for More

Airport Information

Referenced to

Current Position

Figure 12-4 Nearest Airport Waypoint Info

4. Touch one of the keys (Map, Procedures, Runways, etc.) for

more information about the selected airport.

Summary of Contents for GTN 625



































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for GTN 625

Reviews:

Related manuals for GTN 625

Brands by name

Popular brands

Garmin GTN 625, Pilot'S Manual

Search results

Summary of Contents for GTN 625

Reviews:

Related manuals for GTN 625

Brands by name

Popular brands