4-15
190-01004-03 Rev. P
GTN 625/635/650 Pilot’s Guide
FPL
2. Touch the
Hold at WPT
key to open the Hold at Waypoint
dialog window.
Touch to Select
Hold Course
Touch to Select
Leg Length Type
Touch to Select
Course Direction
Touch to Select
Turn Direction
Touch to Select Leg Length
Touch to Use
Selections to
Create Hold at
the Selected Wpt
Touch to Preview
Selected Hold
Touch to Select EFC Time
Figure 4-30 Creating a User-Defined Hold
3. Touch the
Course
key to open the keypad. Use the keypad
and the
Enter
key to select the inbound or outbound course.
4. Touch the
Direction
key to select between Inbound or
Outbound for the course direction.
5. Touch the
Turn
key to select between Left or Right for the turn
direction.
6. Touch the
Leg Type
key to select between Time or Distance
for the leg type.
7. Touch the
Leg Time
or
Leg Distance
keypad. Use the keypad and the Enter key to select the length
of the leg.
8. Touch the Expect Further Clearance (
EFC
keypad. Use the keypad and the
Enter
key to select the Expect
Further Clearance time for a reminder.
9. Touch the
Load Hold
key to add the hold into the flight plan.
4.2.3.2
Removing a Hold
1. On the Active Flight Plan page, touch the Hold to be removed.
The Hold Options window is displayed.
2. Touch the
Remove
key.
3. Touch the
OK
key in response to “Remove Holding Pattern?” The holding
pattern is removed. To cancel the request, touch the
Cancel
key.
Summary of Contents for GTN 625
Page 608: ...This page intentionally left blank ...
Page 609: ......
Page 610: ...190 01004 03 Rev P ...