15-34
GTN 625/635/650 Pilot’s Guide
190-01004-03 Rev. P
System
Figure 15-42 System Units Selection Windows
3. After making the desired selections, touch the
Back
key to
return to the Setup page.
15.7.2 Setting a User-Configured (Manual) Nav Angle
There are three variation (heading) options: Magnetic, True, and User. If
“Magnetic” is selected, all track, course and heading information is corrected
to the magnetic variation computed by the GPS receiver. The “True” setting
references all information to true north. The “User” selection allows the pilot
to enter values between 0º and 179º E or W. When configured by the installer,
there may also be a fourth option: External. If “External” is selected, the GTN
Nav Angle will be synchronized with the on-side MFD.
NOTE
: When changing the Nav angle, the DTK on the Flight Plan page
for an approach does not change until that approach is reloaded.
1. While viewing the System page, touch the
Units
key.
2. Touch the
Nav Angle
key and then the
User
key.
Touch to Select User
(manual) Mag Var
Figure 15-43 Nav Angle Selections
3. After User is selected, touch the
Magnetic Variation
key to
set the value.
Summary of Contents for GTN 625
Page 608: ...This page intentionally left blank ...
Page 609: ......
Page 610: ...190 01004 03 Rev P ...