4-22
GTN 625/635/650 Pilot’s Guide
190-01004-03 Rev. P
FPL
4.2.4.4
Creating an Orbit Pattern
The Orbit SAR pattern is a fixed radius turn around the specified center
waypoint. Automatic waypoint sequencing will be suspended while flying the
orbit pattern.
Selected Initial Wpt
Touch to Select
SAR Pattern Type
Touch to Select
Initial Turn Direction
Touch to Select Radius
Touch to Load Selected Pattern
to the Active Flight Plan
Touch to Load
Selected Pattern to
the Active FPL and
Go Direct-To the First
Wpt in the Pattern
Touch to Preview
Selected Pattern
Figure 4-41 Search and Rescue Orbit Pattern Page
Figure 4-42 Orbit Search Pattern
1. Touch the
SAR Pattern
key and select Orbit as the pattern
type.
2. Touch the
INIT Turn
key to select between Left or Right as
the turn direction.
3. Touch the
Radius
key to open the keypad. Use the keypad
and
Enter
to select the radius of the orbit pattern.
4. Touch the
Preview
key to open a preview of the selected
pattern.
5. Touch the
Load Pattern
key to load selected pattern to the
active flight plan.
OR
6. Touch the
Load PTRN & Activate
key to load selected pattern
to the active flight plan and go direct-to the first waypoint in
Summary of Contents for GTN 625
Page 608: ...This page intentionally left blank ...
Page 609: ......
Page 610: ...190 01004 03 Rev P ...
