9-6
GTN 625/635/650 Pilot’s Guide
190-01004-03 Rev. P
Traffic
9.3.3
Displaying Traffic on the Traffic Page
1. From the Home page, touch the
Traffic
key.
2. Confirm TIS is in Operating Mode.
3. Touch the
Traffic Status
key to toggle between Operate and
Standby mode.
9.3.4
Altitude Display
1. While viewing the Traffic page, touch the
Operate
key to begin
displaying traffic. “Operate” is displayed in the Traffic Status
field.
2. The Altitude Filter limits the traffic displayed to the Below,
Normal, Above or Unrestricted altitude block as listed in the
“Displayed Traffic Range” table. The filter altitudes are relative
to ownship altitude. Touch the
Altitude Filter
key to change
the altitude filter value. Select the desired altitude filter by
touching the
BELOW
,
NORMAL
,
ABOVE
, or
UNRESTRICTED
keys. The selection is displayed in the Altitude mode field.
Selected
Altitude Filter
Slider Indicates
More Selections
are Available
Figure 9-6 Traffic Altitude Filter Page
Altitude Mode
Displayed Traffic Range
Below
-9,900 ft to 2,700 ft
Normal
-2,700 ft to 2,700 ft
Above
-2,700 ft to 9,900 ft
Unrestricted
All Traffic Shown
Table 9-2 Displayed Traffic Range
Summary of Contents for GTN 625
Page 608: ...This page intentionally left blank ...
Page 609: ......
Page 610: ...190 01004 03 Rev P ...