9-27
190-01004-03 Rev. P
GTN 625/635/650 Pilot’s Guide
Traffic
9.6.3.1
Traffic Audio
1.
While viewing the TCAD Control menu, touch the
Traffic Audio
key.
Touch to Raise
the Volume
Touch to Lower
the Volume
Bar Graph Showing Volume Level
Figure 9-23 TCAD Traffic
2. Touch the arrow keys to raise or lower the TCAD Traffic Audio
level. The selected volume will be shown as a percentage value
and graphically with a bar graph.
3. Touch the
Back
key to return to the TCAD Control menu.
9.6.3.2
Field Elevation
1. While viewing the TCAD Control menu, touch the
Elevation
key.
Touch to Automatically
Select the Destination
Airport Field Elevation
Touch to Manually
Set Field Elevation
Figure 9-24 TCAD Traffic Field Elevation Selection
2. With the
Use DEST APT
key deactivated (no green bar), touch
the
Field Elevation
key to manually select the Field Elevation
for traffic reporting. Use the keypad to select the elevation
value.
3. Touch the
Enter
key to accept the selected value. The selected
value will be shown in the
Field Elevation
key.
4. Touch the
Use DEST APT
key to automatically use the field
elevation of the destination airport of the active flight plan for
traffic reporting.
NOTE:
Activating the Use DEST APT feature automatically uses the
elevation for the current destination airport for the TCAD. If no destination
airport is present in the GTN system, the TCAD will not receive a field
elevation and therefore not automatically enter approach mode.
Summary of Contents for GTN 625
Page 608: ...This page intentionally left blank ...
Page 609: ......
Page 610: ...190 01004 03 Rev P ...