Garmin eTrex Vista Owner'S Manual And Reference Manual Download

Page: 70 / 84

Appendix C

The following data ﬁeld options are available on the Map, Navigation, Altimeter,

and Trip Computer Main Pages. Options available

only

on the

Altimeter Page

are

listed on Page 61.

Bearing -

The direction from your current location to a destination.

Course -

The direction from your starting location to a destination.

Current Destination -

The next waypoint on your route.

Current Distance -

The remaining distance to your next waypoint.

Current ETA -

The estimated time of day you will arrive at your next waypoint.

Current ETE -

The estimated time needed to arrive at the next waypoint on your route.

Elevation -

The altitude (height) above or below sea level.

Final Destination -

The last waypoint on your route.

Final Distance -

The remaining distance to your ﬁnal destination.

Final ETA -

The estimated time of day you will reach your ﬁnal destination.

Final ETE -

The estimated time needed to reach your ﬁnal destination.

Glide Ratio -

The ratio of horizontal distance travelled to vertical distance travelled.

For example, a 6:12 glide ratio indicates a 1000’ vertical descent for every 6000’
horizontal distance travelled.

Glide Ratio Destination -

The glide ratio required to descend from current location

and altitude to the location and altitude of your destination.

Heading -

Your moving direction.

Location (lat/lon) -

Your current GPS position.

Location (selected) -

The lat/lon of point deﬁned on map.

Odometer -

A running tally of distance travelled, based upon the distance between

second-by-second position readings.

Off Course -

The distance left or right you are from the original course (path of travel).

Pointer -

Indicates the direction to the next destination.

Speed -

Your rate of travel can be displayed in miles per hour, kilometers per hour, or

nautical miles per hour.

Sunrise -

The time at which the sun rises on this day.

Sunset -

The time at which the sun sets on this day.

Time of Day -

The time for the selected time zone.

Data Field

Deﬁnitions

Summary of Contents for eTrex Vista





















































































Search results

Summary of Contents for eTrex Vista

Reviews:

Related manuals for eTrex Vista

Brands by name

Popular brands

Garmin eTrex Vista, Owner'S Manual And Reference Manual

Search results

Summary of Contents for eTrex Vista

Reviews:

Related manuals for eTrex Vista

Brands by name

Popular brands