background image

1

SOS

T

SOS

S

S

OS

OS

S

SO

SO

SO

S

SOS

SOS

S

S

S S

S

S

SO

SOS

C

1

4

7

*

2

5

8

0

3

6

9

#

SBX-3

English

INTRODUCTION

Thank you for your purchase of redKnows SBX-3 series product. In order to take full advan-
tage of this product, please read this manual carefully before starting to use the product. 

SBX-3 can be used for guarding many types of objects such as cars, boats, excavators, 
containers, motorcycles, campervans and others. In this manual all objects are referred to 
as “vehicles” or objects.

SBX-3 is a GSM based positioning alarm. The alarm can be triggered by an alarm sensor 
connected to one of the inputs or if the object is moved outside a defi ned area, so called 
geofencing.  When triggered the siren will sound and an SMS message will be sent to pre-
stored telephone numbers.

In addition to the alarm function, SBX-3 can also be used for tracking the position of an 
object and control equipment with SMS.

The SBX-3 can only communicate with the prestored telephone numbers on the SIM card in 
SBX-3. They can receive alarm SMS and control the alarm.

SBX-3 

Mini Tracker

User and 

Installation Manual

In the package you will fi nd:

Main unit with integrated GSM 
module and spare battery.

GPS receiver

GSM antenna

Siren

Remote Control

Magnet Switch

Microphone

Cable kit

The units are installed according to the instructions in this manual and a SIM card is inser-
ted. Then the users telephone numbers has to be stored into the SIM-card in order to allow 
access to the system.

After this introduction the manual continues with instructions for handling the SBX-3 with 
the remote controller and a mobile phone, once it is installed an initialised.

The installation should be made by a person with proper knowledge of the electrical system 
of the object. Instructions are found in the Installation Manual. 
When the system is installed a SIM card is inserted and power is applied. Then the SIM 
card should be prepared with the proper settings, this is described in the Setup Manual.

© AxT

ech AB 2006

Summary of Contents for SBX-3 Series






















Reviews: